Stapled Magazines,
insert enclosure in connection with stapling
GLUE-DROP INSERT
Size min: 60 x 80 mm
Size max: 210 x 230 mm -> must be 20 x 30 mm smaller than the main product
Location of glue drop approximately in the middle
Number/placement of inserts: max. 2 pcs. Page locations to be confirmed with print press.
Placement/multi-page insert: spine parallel with lower edge
Target accuracy: 5 mm
Weight: max. 20 g
Format: must have two right angles and a straight side, flexible
NOTE! no accordion fold
With standable weight: 1000 kg
Product sample’s fill level max 25 %
Product sample’s seam width: 5 mm
Thickness max: 2 mm
Material min – max: 2 pages, A6 170 g/m2, A5 130 – 250 g/m2
4-8 pages, 100 – 250 g/m2
more than 8 pages, max 32 pages 60 – 80 g/m2
SEPARATE INSERT
Size min: inside product: 105 x 148 mm
Size max: 220 x 297 mm -> must be 20 x 20 mm smaller than the main product
Placement: between random pages and all inserts in same location
Placement/multi-page product: spine parallel with the spine of the main product
Format must have two right angles and a straight side, flexible
NOTE! no accordion fold
Thickness max: 2 mm
Material min – max
2 pages, A6 170 g/m2, A5 130 – 250 g/m2
4-8 pages, 100 – 250 g/m2
more than 8 pages, max 32 pages 60 – 115 g/m2
max. number of pages 32 pages
STAPLED INSERTS
Size min: 115 x 200 mm (with a grip allowance 115 x 160 mm)
Size max: size of main product
Placement: Between print sheets or in the centre spread
Trim allowance: Same trim allowances as in the main product
Format must have two right angles and a straight side, flexible
Material min – max: 4 pages, 100 – 250 g/m2, 6-16 pages, 80 – 200 g/m2
Additional cover: width of front/back cover min. 100/100 mm
height min. 115 mm, max. height of product
ADHESIVE-BOUND MAGAZINES, insert enclosure in connection with adhesive binding
GLUE-DROP INSERT
Size min: 60 x 80 mm
Size max: 225 x 290 mm -> must be 40 x 40 mm smaller than the main product
Location of glue drop approximately in the middle
Number/placement of inserts: max. 2 pcs, page locations to be confirmed with print press
Placement/multi-page insert: spine parallel with lower edge
Target accuracy: 5 mm
Weight max: 20 g
Format: must have two right angles and a straight side, flexible
NOTE! no accordion fold, no staples
Withstandable weight: 1000 kg
Product sample’s fill level: max. 25 %
Product sample’s seam width: 5 mm
Thickness max: 1 mm
Material min – max:
2 pages, A6 170 g/m2, A5 150 – 250 g/m2
4-8 pages, 100 – 250 g/m2
more than 8 pages, 60 – 80g/m2
GLUE-BOUND INSERTS
Size min: 115 x 210 mm
Size max: size of main product
NOTE! smaller than main product max. thickness 1 mm
Placement: Between print sheets, between front or back cover and internal pages, insert locations to be confirmed with print press
Trim allowance: allowances of main product
Format: must have two right angles and a straight side, flexible
Additional cover width min. 115 mm, max. main product’s width
height: main product’s height
Material min – max
2 pages 150 – 250 g/m2
4-8 pages 100 – 200 g/m2
more than 8 pages 60 – 100 g/m2
INSERT ENCLOSURE AS SEPARATE WORK
INDIVIDUAL PLASTIC WRAPPING
Minimum size of main product: 140 x 200 mm
Maximum size of main product: 300 x 420 mm Thickness: 1 – 60 mm Binding: side/top
Other:
- selective execution
- manual processing of special inserts is possible (to be confirmed with print press)
- Inkjet addressing
Max. number of inserts: 10 pcs, NOTE! The size of inserts affects the max. number of inserts.
Plastics: Polypropene: clear, printed white stripe. Polyethene: clear, white opaque, grey transparent pre-printed plastics, NOTE! Check dimensions and delivery time from print press
SEPARATE INSERT
Min. size in magazine: 100 x 150 mm -> must be 20 x 20 mm smaller than the main product
Min. size on top of magazine: 35 x 50 mm
Size max: 300 x 420 mm, insert enclosure of inserts that are larger than the main product must be confirmed with the print press
Placement: inside magazine, between random pages and all inserts in same location
on top/under magazine
GLUE-DROP INSERT
Size min: 35 x 50 mm
Size max: 205 x 130 mm
Thickness max: 30 mm
Placement: Front or back cover of magazine, placement of insert to be confirmed with print press
PACKAGING AND CONSIGNMENT INSTRUCTIONS
PACKAGING AND DELIVERY
Notice
– notice about inserts must be provided to the contact person well in advance
– insert must always be approved by print press
Delivery address of test product samples
PUNAMUSTA OY, contact person, PO Box 99, 80141 JOENSUU
PUNAMUSTA TAMPERE OY, contact person, Kaapelikatu 1, 33330 TAMPERE
Delivery time
no later than the material date of the main product
Delivery address
PUNAMUSTA OY, jälkikäsittely, Kosti Aaltosen tie 9, 80141 JOENSUU
PUNAMUSTA TAMPERE OY, jälkikäsittely, Kaapelikatu 1, 33330 TAMPERE
PACKAGING
Product samples:
- ordered in the same way, rows and layers separated with cardboard and packed in boxes
Other:
- box packaging on pallets or inserts with the largest possible turns without sleeves
- compact pallet packaging
- inserts for different magazines to be packed on their own pallets
The following markings must be indicated on the boxes/pallets and the waybill/consignment note:
- name of insert
- quantity/unit
- quantity/consignment
- name and number of main product
Other
Excess inserts are sent to storage or disposed
The customer is responsible for any transport or disposal costs.
PunaMusta’s insert instructions