Inserts Info

STITCHED MAGAZINES, Inserting online

Dot Glued Insert

Minimum size: 60 x 80 mm
Maximum size: 
210 x 230 mm -> has to be 20 x 30 mm smaller than the main product
Placing on the page: In the middle
Amount of inserts/Placing: maximum 2 inserts per magazine. Get information about placing from your contactperson.
Placing of Multipage Inserts: Spine towards the bottom edge of the magazine
Placing Accuracy: 5 mm
Maximum weight: 20 g
NOTE! Z-folding or stitching (stapling) of the insert not allowed!
Be able to widthstand weight: 1000 kg
Fillnes of product sample:  max. 25 %
Product sample seam:  5 mm
Maximum thickness: 2 mm
Material min – max:
2 page. A6 170 g/m2, A5 130 – 250 g/m2
4-8 page. 100 – 250 g/m2
over 8 page. max 32 page.  60 – 80 g/m2

Loose Insert

Minimum size: inside the product: 105 x 148 mm
Maximum size: 220 x 297 mm -> has to be 20 x 20 mm smaller than the main product
Placing: Spine towards the bottom edge of the magazine
NOTEZ-folding or stitching (stapling) of the insert not allowed!
Maximum thickness: 2 mm
Material min – max
2 page. A6 170 g/m2, A5 130 – 250 g/m2
4-8 page. 100 – 250 g/m2
over 8 page. 60 – 115 g/m2
max 32 page.

Stitched Inserts

Minimum size: 115 x 200 mm (with grip 115 x 160 mm)
Maximum size: Same as main product
Placing: Between the signatures or in the middle of the magazine
Bleed: Same bleed as in the main product
Material min – max: 4 pages. 100 – 250 g/m2, 6-16 pages. 80 – 200 g/m2
Additional cover: front-/backcover widht min 100/100 mm
hight min 115 mm, max same hight as in the main product

PERFECT BOUND MAGAZINES, inserting online

Dot Glued Insert

Minimum size: 60 x 80 mm
Maximum size: 225 x 290 mm -> has to be 40 x 40 mm smaller than the main product
Placing on the page: In the middle
Amount of inserts/Placing: maximum 2 inserts per magazine. Get information about placing from your contactperson.
Placing of Multipage Inserts: 
Spine towards the bottom edge of the magazine
Placing Accuracy: 5 mm
Maximum weight: 20 g
NOTEZ-folding or stitching (stapling) of the insert not allowed!
Be able to widthstand weight: 1000 kg
Fillnes of product sample: max. 25 %
Product sample seam: 5 mm
Maximum thickness: 1 mm
Material min – max: 
2 page. A6 170 g/m2, A5 150 – 250 g/m2
4-8 page. 100 – 250 g/m2
over 8 page. 60 – 80 g/m2

Loose Insert

Minimum size: 105 x 148 mm
Maximum size: 220 x 297 mm -> has to be 20 x 20 mm smaller then the main product
Amount of inserts: max. 4 inserts-> Thickness of these 4 max: 3 mm
Placing: Between random pages of the magazine, all inserts together
Placing of Multipage Inserts: Spine towards the bottom edge of the magazine
Maximum thickness: 2 mm
Material min – max:
2 page. A6 170 g/m2, A5 150 g/m2, B5 115 – 250 g/m2
4-8 page. 100 – 250 g/m2
over 8 page. max 32 page  60 – 115 g/m2

Inserts Glued in the Spine

Minimum size: 115 x 210 mm
Maximum size: The size of the main product
NOTE! Has to be smaller than the main product, max thickness 1 mm
Placing: Between signatures, between signature and front- or back cover
(get information about the placing from your contactperson)
Bleed: 
Same bleed as in the main product
Extra cover: width: min 115 mm, max width: same as the main product
max hight: same as the main product
Material min – max: 
2 page.150 – 250 g/m2
4-8 page. 100 – 200 g/m2
over 8 page. 60 – 100 g/m2

INSERTING OFFLINE

Singleplastic Wrapping

Minimum size of the main product: 140 x 200 mm

Maximum size of the main product: 300 x 420 mm
Thickness: 1 – 60 mm
Seem:
 On the side or in the middle on top
Muuta:

  • Selective inserting also possible
  • Special inserts can be handled manually (check with your contactperson)
  • Inkjet-addressing

Amount of inserts: 10 pcs, NOTE! Different size of the inserts.
Plastic: Polypropen or Polyeten

Also possible to get printed plastic. Note: Long delivery time

Loose Inserts

Minimum size inside the product: 100 x 150 mm -> has to be 20 x 20 mm smaller than the main product
Minimum size on top of the product: 35 x 50 mm
Maximum size: 300 x 420 mm, Inserts bigger than main product has to be checked
Placing: Inside the product or random inside the magazine, all inserts together
On top/under the product

Dot Glued Insert

Minimum size: 35 x 50 mm
Maximum size: 205 x 130 mm
Maximum thickness: 30 mm
Placing: On the front- or backcover, exactly placing check with your contactperson

Packing and Delivery

Always book the insert in time. Check with your contactperson
that the insert is ok for inserting.

Send an example of the insert to: 
PUNAMUSTA OY, Jälkikäsittelyosasto, PL 99, 80141 JOENSUU
PUNAMUSTA TAMPERE OY,Teemu Venejärvi, Kaapelikatu 1, 33330 TAMPERE

Time of delivery
One day before sending pdf files for the main product

Delivery address 
PUNAMUSTA OY , Jälkikäsittely, Kosti Aaltosen tie 9, 80140 JOENSUU
PUNAMUSTA TAMPERE OY, Jälkikäsittely, Kaapelikatu 1, 33330 TAMPERE

Packing

Product samples:

  • orderly same size up and in uniform position in cartons with cardboard sheets between both rows and layers

Other inserts:

  • either in cartons or in loose, untied stacks with as few compensating turns as possible
  • both tightly and neatly packed on pallets

Identification Markings:

  • Markings on all cartons / pallets must include the name and issue number of the magazine, the name of the insert, its total quantity and quantity per packing unit

Inserts left over after inserting will be destroyed or with separate agreement, we can store them.
Any costs for freight, destroying or storage will be on customers account.